Shopping Cart

0 item(s) in cart/ total: $0    view cart
Hitec HS-5055MG Digital Servo
Hitec HS-5055MG Digital Servo

Hitec HS-5055MG Digital Servo

Your Price: $17.99
Out of Stock.
Part Number:KRS-19459

Introducing the all new HS-5055MG Metal Gear Feather Servo. Tired of having your sub-micro servos strip gears? The HS-5055Mg is the solution! Not only does this servo have super-strong metal gears but it also incorporates the latest in digital technology. Along with a Hitec programmer, you can change a number of performance characteristics of the HS-5055MG. We offer the new HS-5055MG servo in several configurations, 90° stock rotation, 120° modified rotation (programmed), and reverse rotation.

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse:
  3-5 Volt Peak to Peak Square Wave

Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -
20° to +60° C (-4°F to +140°F)
Operating Speed (4.8V): 0.20 sec/60° at no load
Operating Speed (6.0V): 0.17 sec/60° at no load
Stall Torque (4.8V): 18.05 oz/in. (
Stall Torque (6.0V): 22.2 oz/in. (

Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable
: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Dead Band Width: 
Motor Type: Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Plastic
Gear Type: Metal Gears
Connector Wire Length: 7" (178mm)
Dimensions: .89" x 0451"x .94" (22.8 x 11.6 x 24mm)

Programable Features:

- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 120 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)

Related Items

Recently Viewed Items