Description: This is a breakout board for the Maxim MAX7456 monochrome on-screen display chip. The board is set up with all supporting circuitry and RCA connectors to allow the user to easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC). Just plug in your video signal to "Video In", plug your TV into "Video Out", connect a microcontroller to the SPI interface and supply the board with 5V@100mA (worst case) and you're good to go. Supplied sample code runs on an ATMega168/328 (16MHz) and compiles with WinAVR, so it's just about "plug-and-play" with an Arduino board.
Features:
- Input voltage 5V
- Current consumption 100mA, worst case
- 5V SPI interface
Dimensions: 1.8×0.9"
Weight: 0.30 ounces, 8.6 grams
Documents:
